HI 98108 pHep pH -Tester (0.1 pH Resolution)

Manufacturer: HANNA Instruments Inc.

Order number: HI98108

Availability:         0 pcs. in stock

Delivery time approx. 2 to 4 weeks

186.00AED *

Product information "HI 98108 pHep pH -Tester (0.1 pH Resolution)"

The pHep®+ revolutionized the pH industry by providing   non-technical personnel with a simple, inexpensive solution to accurate   pH measurement.

HI 98108 is used by millions of people around the world to monitor pH   in laboratories and industrial applications as well as in agriculture,   fish farming, food manufacturing and quality control, swimming pools  and  the printing industry.

With a renewable cloth junction, the pHep®+ has an   extended life over typical pH testers. A normal junction clogs with use   over time and a typical tester would normally have to be thrown away   once the junction is too contaminated. HI 98108’s junction is 2 cm long   and when dirty, can be pulled out to expose a fresh section to   effectively renew the pHep’s life.

Calibration is performed manually at 1 or two points with a trimmer located on the side of the tester.

With a battery life of 200 hours of continuous use, the pHep®+ will provide months of testing before the batteries need to be replaced.

Order Information:   HI 98108 (pHep®+) is supplied with protective cap, calibration screwdriver, batteries and instructions.

Product Manuals

  Manual: Download

Specification :

Range   0.0 to 14.0 pH
Resolution   0.1 pH
Accuracy   ±0.1 pH
Calibration   manual, 2 points
Temperature Compensation   Automatic, 0 to 50°C
Battery Type / Life   1.5V (4) / approximately 200 hours of continuous use
Environment   0 to 50°C (32 to 122°F); RH max 95%
Dimensions   175 x 41 x 23 mm (6.9 x 1.6 x 0.9")
Weight   95 g (3.4 oz.)



Onward links to "HI 98108 pHep pH -Tester (0.1 pH Resolution)"

Further products by HANNA Instruments Inc.

Customer evaluation "HI 98108 pHep pH -Tester (0.1 pH Resolution)"

Evaluations will be activated after verification

Write an evaluation


The fields marked with * are required.